StumpHunters Cycling and MTB page

Home
Bike WorkShop
Riding Tips
Play Areas - EA
Play Areas - Other
Routes - EA
Routes - Other
Reviews
Ride Reports
Health
Gallery
Videos
Links
Our Bikes

Current Bikes
Chris's BMX
Chris Titus Switchblade

Dicks Scott FS1

Fergus's Merlin
Richards DMR
Tim Turners Big Hit
Tim Turners Ruckus

Michaels Bullet

Paul's Titus Riddler
Phil's Titus Racer X
Woody's Switchblade
Dead Bikes
Chris's Coyotte DH3

Chris's Coyotte DS

Chris's Kona
Tim Turners I-drive

Tim's Giant

Chris's Coyote

This bike started out as a 18inch GT Ruckus ... you can tell can't you, after realising that the Ruckus frame was a little to long I got hold of this Coyote frame on the cheap and did a complete swap of bits, rode the bike a few times and found it to be a lot more forgiving ........... so stayed with it.

1 February 2002 After bending the Stock (and very short) seatpost I replaced it with a very very long and very very nice Roox
2 February 2002 Seatpost rails bent ... bugger, In the mode for spending so buy a Azonic seat ...... bend the rails first ride ... seatpost fine
18 February 2002 Stock seat collar changed to a Woodmans Deathgrip QR .. just liked the name
25 March 2002 After going to the "I will not spend any money bike show" this bike got a a new Selli Italia saddle to match the rest of the bike in color, bigger tyres (cus they were cheap) and a set of shimano pedals (big bargain of the show 29 notes), after a really bad ride at the weekend (which I blame on the forks) the forks are back to 125mm
29th Dec 2002 2001 RockShox Psylo's finally die (hard life) after a visit to woburn sands .. replaced with 2003 Dirt Jumper Three's
March 2003 A Sad day indeed, Frame finally gives up after to much abuse and general bad landings